Furniture wrapping in Tallinn
Vinyl wrapping for furniture and interiors
Interior vinyl changes the colour and texture of your furniture without replacing the whole piece. Decords wraps kitchen doors, cabinets, doors, tables, shelves, panels and suitable appliance surfaces.
A real Decords project: kitchen doors after wrapping
Get an initial quote
Leave your contact details and installation address. Attach furniture photos using the file upload field.
- We choose the type of film to suit the surface, how it is used and the finish you want.
- We make an initial assessment from photos, measurements and a description of your project.
- Before starting, we agree on the material, work included, preparation and price.
Please note: film is not suitable for every damaged surface. The base must be stable and compatible with the adhesive. Chips, peeling coatings, moisture damage and deep uneven areas may need repair or make wrapping unsuitable.
Completed projects · Tallinn
Updating tables at Kamikadze restaurants
We wrapped all the tables at the Kamikadze restaurants in Tallinn in black marble effect vinyl. We covered the tabletops and edges, tucking the film underneath each top.
The work took around two days while the restaurant was being renovated. We kept the existing tables and completely changed their look. The marble pattern complemented the updated interior and made the old tables look new.
- Time taken
- Around 2 days
- Material
- Black marble effect vinyl
- Edge finish
- Wrapped underneath the tabletop
The before and after photos were taken from different angles. Select a photo to see the full image.
Before and after videos
Both videos play without sound. Press ▶ to watch.
8 more project photos
You can see our work at the Kamikadze restaurants in Tallinn. Would you like to update tables, a counter or other furniture? Send us photos for an initial quote.
Discuss furniture wrappingPractical benefits
When furniture wrapping makes sense
Wrapping works well when the furniture still does its job, but its colour, texture or design no longer suits the room. The result depends on the condition of the base, the right material and proper surface preparation.
What this example shows Wrapping changes the look of furniture without making a new set of doors. The result always depends on the original condition and the chosen film.
-
Keep the furniture structure that still works
If the cabinets, doors and fittings are in good condition, you may not need to replace the whole piece just because its colour or style feels dated.
-
Change the colour and texture
Solid colours, matte, gloss and textured finishes help existing furniture fit a new interior without a complete renovation.
-
Update only the parts you need
Your project can include doors, visible sides, panels or individual accent pieces. We agree on the scope based on your needs and surface compatibility.
-
Less dismantling in the room
In many projects, the furniture stays in place and only the parts that need preparation and wrapping are removed. The method depends on the construction and access.
-
Get an estimate before work begins
Photos, measurements, the number of parts and your chosen finish allow us to prepare an initial estimate. We confirm the final price after checking the surface condition and full scope.
Wrapping does not replace furniture repairs. Film cannot strengthen swollen boards, repair deep chips or stabilise a peeling finish. These issues need preparation or replacement of the damaged part first. In some cases, wrapping will not be suitable.
About us
Decords: from assessment to installation
Decords is based in Tallinn. We wrap furniture, interior features, glass, shopfronts and other suitable surfaces. For furniture projects, we bring surface assessment, material selection, preparation and installation together in one process.
- Assessing your surface We check the base material, finish, edges, damage and how the furniture is used.
- Choosing the right film We agree on colour, texture, expected wear and the technical limits of the selected material.
- Preparing for installation We decide in advance which parts need removing, what needs cleaning and how much access we need.
- One agreed scope of work Before starting, we confirm the surfaces, material, price and working arrangements.
Our approach: first check whether the item is suitable for wrapping, then select the material and agree on the expected result. If the surface condition makes wrapping unreliable or unsuitable, we discuss that before work begins.
Why Decords?
Why choose Decords for furniture wrapping?
You get a planned project as well as vinyl installation: surface checks, material selection, a clear scope of work and a final inspection. This helps everyone understand what will be done and what result to expect.
-
We assess the base first
We check the surfaces, edges and individual parts. If an area needs extra preparation for reliable wrapping, we tell you before starting.
-
We choose film for your project
We consider the furniture type, how it is used and your preferred colour and texture. We select material for the actual surface, not just from a sample photo.
-
We agree on the work in advance
We confirm which doors, edges, panels and parts are included, whether dismantling is needed and what preparation we will carry out.
-
We take care with the details
Corners, edges, joins, cutouts and areas around fittings all affect the finished appearance, so we pay close attention to them during wrapping.
-
We check the result
After installation, we inspect the agreed surfaces and address any issues with our wrapping identified at handover.
-
We leave clear care instructions
We explain how to use and clean the updated surface, then remove the packaging and waste produced by our work.
Questions and answers
Frequently asked questions about furniture wrapping
Suitability, the exact price and timing depend on your furniture. Photos and measurements let us make an initial assessment. We confirm the final terms after checking the surface and agreeing on the full scope of work.
Can my furniture be wrapped?
Smooth, firm and stable surfaces are usually the best candidates: doors, panels, shelves, tables and individual interior features. We make the final decision after assessing the base, edges, damage and conditions of use.
What should I send for a furniture wrapping quote?
Send photos, approximate measurements and the number of parts. Include close-ups of damage or old film. We confirm the price before starting work.
Which colours and textures can I choose?
Options include solid matte and gloss colours, wood, stone and other interior finishes. Custom printing is possible for some projects. We first check that the chosen material suits the surface and conditions of use.
Can you wrap a worktop, bathroom furniture or an appliance?
Sometimes, but we assess these surfaces separately. Heat, humidity, water, cleaning products and wear all matter. Not every film or base is suitable, so we need to inspect the item before confirming.
Will the film hide scratches, chips and other damage?
Film changes the colour and texture but does not repair the base. Deep chips, swelling, peeling coatings and uneven areas may still show or prevent reliable adhesion. We assess the preparation needed from the actual condition.
Do I need to prepare the furniture before you arrive?
Remove personal belongings from the furniture and work area, provide access to the parts and tell us about visible damage. We agree separately on removing doors, handles and other fittings, and on any special cleaning.
How long does furniture wrapping take?
Timing depends on the number and shape of the parts, surface condition, dismantling and access. A small item and a complete kitchen take different amounts of time. We give an estimate after assessing the scope and confirm it with the agreed work.
Can the film be removed later?
In many cases, yes. The result depends on the base material, paint or varnish, how long the film has been in place and the removal method. Use a suitable method and test an inconspicuous area first to reduce the risk of damage or adhesive residue.
Will joins, edges and corners be visible?
The wrapping method depends on the shape of the part and the available material width. Some surfaces require joins. We discuss their position, edge finishing and any limits caused by complex shapes before starting.
Is there a warranty on the work?
The terms depend on the material, base and conditions of use. Ask which terms apply to your project before ordering. The agreed obligations and handover process are recorded in the order documents.
How do I order, and where is Decords?
Fill in the form at the top of this page and attach overall and close-up photos, measurements, the number of parts, the address and the result you want. The Decords workshop is in Kristiine, Tallinn. Work outside Tallinn and travel arrangements are agreed separately.
A project from the Decords portfolio
Start with photos
Get an initial estimate for wrapping your furniture
You do not need to visit the workshop straight away or know the exact name of a film. Send the details through the form at the top of this page. Decords will check whether we have enough information for a quote and ask for anything else we need.
What to include in your enquiry
- An overall view A few photos of the whole piece from different angles.
- Details and measurements Edges, corners, damage and approximate dimensions.
- Your goal and the address The colour or texture you want and where the work will take place.
The initial estimate is not the final price. We confirm it after checking the surface, scope and working conditions.














