Furniture wrapping in Tallinn

Vinyl wrapping for furniture and interiors

Interior vinyl changes the colour and texture of your furniture without replacing the whole piece. Decords wraps kitchen doors, cabinets, doors, tables, shelves, panels and suitable appliance surfaces.

  • Kitchen doors
  • Cabinets and doors
  • Tables and shelves
  • Appliances
  • Wall panels
Kitchen with dark doors after an interior vinyl wrap by Decords

A real Decords project: kitchen doors after wrapping

Get an initial quote

Leave your contact details and installation address. Attach furniture photos using the file upload field.

1 Step 1
AnOL OÜ uses your details and files to respond to your enquiry and prepare a quote. Sending an enquiry does not subscribe you to marketing emails. Privacy Policy. Terms of Service.Please attach only files needed for your enquiry.
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
  • We choose the type of film to suit the surface, how it is used and the finish you want.
  • We make an initial assessment from photos, measurements and a description of your project.
  • Before starting, we agree on the material, work included, preparation and price.

Please note: film is not suitable for every damaged surface. The base must be stable and compatible with the adhesive. Chips, peeling coatings, moisture damage and deep uneven areas may need repair or make wrapping unsuitable.

Completed projects · Tallinn

Updating tables at Kamikadze restaurants

We wrapped all the tables at the Kamikadze restaurants in Tallinn in black marble effect vinyl. We covered the tabletops and edges, tucking the film underneath each top.

The work took around two days while the restaurant was being renovated. We kept the existing tables and completely changed their look. The marble pattern complemented the updated interior and made the old tables look new.

Time taken
Around 2 days
Material
Black marble effect vinyl
Edge finish
Wrapped underneath the tabletop
A Kamikadze restaurant table before wrapping, with wear on the dark tabletop
Before wrapping: a plain surface with signs of wear
A Kamikadze restaurant table after wrapping in black marble effect vinyl
After wrapping: black marble effect vinyl

The before and after photos were taken from different angles. Select a photo to see the full image.

Before and after videos

Both videos play without sound. Press ▶ to watch.

Before wrapping · 1 min 41 sec
After wrapping · 1 min 6 sec

You can see our work at the Kamikadze restaurants in Tallinn. Would you like to update tables, a counter or other furniture? Send us photos for an initial quote.

Discuss furniture wrapping

Wrapping options

What can we wrap, and which film should you choose?

We start with the item and the condition of its surface, then choose the colour, texture and a suitable material. The main options are shown below. We check film compatibility using photos, measurements and, where needed, a sample of the surface.

Which items can be wrapped?

For each item, we consider the base material, condition of the coating, edges and joints, and how much wear the surface will receive.

  • Kitchen doors wrapped in dark interior vinyl

    Kitchen doors

    Doors, visible sides and other suitable kitchen surfaces. Worktops are assessed separately because of heat, moisture and wear.

    We check the finish, edges and areas exposed to heat

  • A cabinet with green doors showing how vinyl can change the colour

    Cabinets and chests of drawers

    Doors, drawer fronts and visible side panels on furniture with a stable surface.

    We assess handles, corners and the condition of the finish

  • Doors with a wood effect vinyl finish in a modern interior

    Doors and fitted furniture

    Interior doors, cupboard doors and flat panels. Routed details and complex profiles may limit the choice of material.

    We check profiles, edges and adjoining surfaces

  • A dining table with a dark decorative surface

    Tables, counters and shelves

    Horizontal surfaces can be refreshed with vinyl when the chosen material suits the expected wear and cleaning method.

    We account for friction, cleaning, moisture and temperature

  • A fridge and kitchen furniture in a matching dark finish

    Appliances

    Visible exterior panels of fridges and other suitable appliances. Vents, seals and parts that heat up must remain uncovered.

    We check heat, ventilation and the shape of the appliance

  • A decorative wood effect wall panel in a bedroom

    Wall and decorative panels

    Flat panels, alcoves and interior features can be brought into the overall colour scheme of a room.

    We assess flatness, joints and the condition of the base

  • A light bathroom with stone effect furniture and panels

    Bathroom furniture

    Doors and suitable panels outside areas that stay wet. The base must not be swollen, peeling or damaged by moisture.

    We check moisture exposure and the condition of the base

  • A commercial counter with a grey vinyl finish

    Commercial furniture

    Counters, reception desks, display units and furniture for offices, shops or hospitality venues can be finished to match the interior or brand colours.

    We agree on use, colour and the work included

If the surface already has old film, we first assess whether it can be removed, the condition underneath and the adhesive cleaning needed. When required, this stage is priced separately.

Choose the look of your surface

The images help you explore options. Confirm the exact shade, sheen and texture with a physical sample under the lighting in your room.

  • A kitchen with dark matte doors as an example of solid colour vinyl

    Solid matte colour

    A calm finish with little sheen. Suitable for modern doors and panels when the base is compatible.

    For a calm, consistent interior

  • A dark glossy tabletop with a strong reflection

    Solid gloss colour

    Reflects light and gives the colour more depth. Gloss also makes surface preparation, fingerprints and small uneven areas more noticeable.

    For a striking reflective finish

  • Doors wrapped in light wood effect vinyl in a hallway

    Wood effect

    A wood grain design, with texture depending on the collection. We agree on the scale and direction of the pattern before wrapping.

    For doors, cabinets, panels and furniture fronts

  • A light bathroom with white marble effect surfaces

    Stone or marble effect

    A decorative pattern for furniture fronts, panels and accent surfaces. The pattern across adjacent pieces needs to be planned in advance.

    For light interiors and statement surfaces

  • Bathroom furniture with a custom colourful geometric design

    Custom printed vinyl

    Your own pattern, brand colours or graphics. Artwork, scale, placement and the protective layer are agreed separately.

    For branding and personalised designs

  • An open box with shiny silver parts beside a window, overall view

    Mixed finishes

    Combine colours or textures across doors, alcoves and individual details to highlight the furniture shape or define different areas.

    For colour combinations and accent details

A photo cannot replace a material sample. Colour depends on the screen and lighting, and texture is best checked in person. Before ordering, Decords confirms availability and compatibility with your surface.

Not sure which option will work? Send photos, measurements and a short description of your project. These help us suggest suitable materials and identify any details we need to clarify.

Send your enquiry and photos

Practical benefits

When furniture wrapping makes sense

Wrapping works well when the furniture still does its job, but its colour, texture or design no longer suits the room. The result depends on the condition of the base, the right material and proper surface preparation.

Kitchen before and after its pink doors were changed to a light finish with vinyl
The same kitchen before and after the doors were updated. The furniture structure stays, while the look changes.

What this example shows Wrapping changes the look of furniture without making a new set of doors. The result always depends on the original condition and the chosen film.

  1. Keep the furniture structure that still works

    If the cabinets, doors and fittings are in good condition, you may not need to replace the whole piece just because its colour or style feels dated.

  2. Change the colour and texture

    Solid colours, matte, gloss and textured finishes help existing furniture fit a new interior without a complete renovation.

  3. Update only the parts you need

    Your project can include doors, visible sides, panels or individual accent pieces. We agree on the scope based on your needs and surface compatibility.

  4. Less dismantling in the room

    In many projects, the furniture stays in place and only the parts that need preparation and wrapping are removed. The method depends on the construction and access.

  5. Get an estimate before work begins

    Photos, measurements, the number of parts and your chosen finish allow us to prepare an initial estimate. We confirm the final price after checking the surface condition and full scope.

Wrapping does not replace furniture repairs. Film cannot strengthen swollen boards, repair deep chips or stabilise a peeling finish. These issues need preparation or replacement of the damaged part first. In some cases, wrapping will not be suitable.

About us

Decords: from assessment to installation

Decords is based in Tallinn. We wrap furniture, interior features, glass, shopfronts and other suitable surfaces. For furniture projects, we bring surface assessment, material selection, preparation and installation together in one process.

  • Assessing your surface We check the base material, finish, edges, damage and how the furniture is used.
  • Choosing the right film We agree on colour, texture, expected wear and the technical limits of the selected material.
  • Preparing for installation We decide in advance which parts need removing, what needs cleaning and how much access we need.
  • One agreed scope of work Before starting, we confirm the surfaces, material, price and working arrangements.

Our approach: first check whether the item is suitable for wrapping, then select the material and agree on the expected result. If the surface condition makes wrapping unreliable or unsuitable, we discuss that before work begins.

A row of shiny silver rectangular parts in a cardboard box, viewed from above
A real work in progress: commercial furniture parts prepared before wrapping and assembly are completed.
Surface assessment Preparing the parts Wrapping and assembly

Why Decords?

Why choose Decords for furniture wrapping?

You get a planned project as well as vinyl installation: surface checks, material selection, a clear scope of work and a final inspection. This helps everyone understand what will be done and what result to expect.

  1. We assess the base first

    We check the surfaces, edges and individual parts. If an area needs extra preparation for reliable wrapping, we tell you before starting.

  2. We choose film for your project

    We consider the furniture type, how it is used and your preferred colour and texture. We select material for the actual surface, not just from a sample photo.

  3. We agree on the work in advance

    We confirm which doors, edges, panels and parts are included, whether dismantling is needed and what preparation we will carry out.

  4. We take care with the details

    Corners, edges, joins, cutouts and areas around fittings all affect the finished appearance, so we pay close attention to them during wrapping.

  5. We check the result

    After installation, we inspect the agreed surfaces and address any issues with our wrapping identified at handover.

  6. We leave clear care instructions

    We explain how to use and clean the updated surface, then remove the packaging and waste produced by our work.

Kitchen furniture before and after wrapping in black and gold vinyl
A kitchen before and after its doors, worktop and wall panel were updated with vinyl.
How we work Materials, scope, preparation and price are agreed before wrapping begins. If the inspection reveals anything new, we discuss it before carrying out extra work.

Questions and answers

Frequently asked questions about furniture wrapping

Suitability, the exact price and timing depend on your furniture. Photos and measurements let us make an initial assessment. We confirm the final terms after checking the surface and agreeing on the full scope of work.

Rolls of interior vinyl with wood, stone and solid colour finishes
Colour and texture matter, but the material also needs to suit the surface and how it is used.
Have another question? Send photos of the furniture and a short description of your project. We can then tell you which details we need to assess it. Go to the enquiry form
Can my furniture be wrapped?

Smooth, firm and stable surfaces are usually the best candidates: doors, panels, shelves, tables and individual interior features. We make the final decision after assessing the base, edges, damage and conditions of use.

What should I send for a furniture wrapping quote?

Send photos, approximate measurements and the number of parts. Include close-ups of damage or old film. We confirm the price before starting work.

Which colours and textures can I choose?

Options include solid matte and gloss colours, wood, stone and other interior finishes. Custom printing is possible for some projects. We first check that the chosen material suits the surface and conditions of use.

Can you wrap a worktop, bathroom furniture or an appliance?

Sometimes, but we assess these surfaces separately. Heat, humidity, water, cleaning products and wear all matter. Not every film or base is suitable, so we need to inspect the item before confirming.

Will the film hide scratches, chips and other damage?

Film changes the colour and texture but does not repair the base. Deep chips, swelling, peeling coatings and uneven areas may still show or prevent reliable adhesion. We assess the preparation needed from the actual condition.

Do I need to prepare the furniture before you arrive?

Remove personal belongings from the furniture and work area, provide access to the parts and tell us about visible damage. We agree separately on removing doors, handles and other fittings, and on any special cleaning.

How long does furniture wrapping take?

Timing depends on the number and shape of the parts, surface condition, dismantling and access. A small item and a complete kitchen take different amounts of time. We give an estimate after assessing the scope and confirm it with the agreed work.

Can the film be removed later?

In many cases, yes. The result depends on the base material, paint or varnish, how long the film has been in place and the removal method. Use a suitable method and test an inconspicuous area first to reduce the risk of damage or adhesive residue.

Will joins, edges and corners be visible?

The wrapping method depends on the shape of the part and the available material width. Some surfaces require joins. We discuss their position, edge finishing and any limits caused by complex shapes before starting.

Is there a warranty on the work?

The terms depend on the material, base and conditions of use. Ask which terms apply to your project before ordering. The agreed obligations and handover process are recorded in the order documents.

How do I order, and where is Decords?

Fill in the form at the top of this page and attach overall and close-up photos, measurements, the number of parts, the address and the result you want. The Decords workshop is in Kristiine, Tallinn. Work outside Tallinn and travel arrangements are agreed separately.

Finished dark kitchen doors after a vinyl update A project from the Decords portfolio
A finished kitchen after the doors were updated. The result depends on the original condition, chosen film and agreed scope of work.

Start with photos

Get an initial estimate for wrapping your furniture

You do not need to visit the workshop straight away or know the exact name of a film. Send the details through the form at the top of this page. Decords will check whether we have enough information for a quote and ask for anything else we need.

What to include in your enquiry

  1. An overall view A few photos of the whole piece from different angles.
  2. Details and measurements Edges, corners, damage and approximate dimensions.
  3. Your goal and the address The colour or texture you want and where the work will take place.
Open the form and send photos

The initial estimate is not the final price. We confirm it after checking the surface, scope and working conditions.

1 Step 1
AnOL OÜ uses your details and files to respond to your enquiry and prepare a quote. Sending an enquiry does not subscribe you to marketing emails. Privacy Policy. Terms of Service.Please attach only files needed for your enquiry.
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right

Decords portfolio

Furniture and interior wrapping examples

Every project starts with a particular surface and a specific goal. Here are examples from the Decords portfolio, from kitchen doors and commercial furniture to individual pieces. Select a photo to view it at full size.

Meet our team

We are Decords, a printing and wrapping workshop in Tallinn. Meet the people who prepare your order and install your graphics.

Andrei Kolchin

Founder and workshop manager. Organises the work and oversees the finished result.

Oleg Golikov

Vinyl installer. Selects film for the job, prepares the surface and installs the film on site.

Sergei Makarkin

Print specialist. Checks the artwork, prepares the material and prints the graphics.

Artur Nerush

Vinyl cutting specialist. Cuts the film, checks the details and prepares orders for collection or installation.

Our mission

Help people and businesses create spaces that feel good to live and work in.

Our goal

Bring your idea to life with a material that suits the surface and the way it will be used.

Our values

We take care over our work, keep our promises and listen to what you need. We agree on the details before starting and check the result before handing it over.

How to find the Decords workshop

Please arrange your workshop visit in advance. We install in Tallinn and elsewhere in Estonia by arrangement. We confirm delivery options within Estonia and abroad for each order.

Address

Madara 33/1, room S1
Kristiine, 10613 Tallinn

Opening hours

Mon to Fri, 10:00 to 18:00
Closed on Saturday and Sunday

+372 5874 3963
info@decords.ee

Get directions
Directions in Google Maps ↗

 Tel.: +372 5874 3963 | AnOL OÜ | Email: info@decords.ee | Workshop: Madara 33/1, room S1, 10613 Tallinn, Estonia | © 2026 Decords™

Posted on Google
Juri Kondratjev profile picture
Juri Kondratjev
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex checks that the original source of this review is Google.
The work was done quickly and to a high standard. Thank you very much! Translated from Russian.
Original reviewРабота выполнена быстро и качественно. Большое спасибо!
Posted on Google
Jaanus Tamme profile picture
Jaanus Tamme
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex checks that the original source of this review is Google.
Thank you. The work was quick and communication was very positive. Recommended. Translated from Estonian.
Original reviewTänud. Töö kiire. Suhtlus väga positiivne. Soovitan.
Posted on Google
Pille Poska profile picture
Pille Poska
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex checks that the original source of this review is Google.
The work was done accurately and quickly! Translated from Estonian.
Original reviewTöö tehtud täpselt ja kiiresti!
Posted on Google
Gab Vag profile picture
Gab Vag
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex checks that the original source of this review is Google.
My first order. It was only a small order, but my initial rating would be 4.5 rather than 5: receiving it took longer than expected, I had to send a reminder, and finding the right place when I arrived was a bit of an adventure. Still, all is well that ends well, and the stickers themselves were 5+ ;) Translated from Estonian.
Original reviewEsmakordne tellimus. Tellimus oli küll pisike, aga esialgne hinnang ei ole 5 väärt vaid 4,5, kuna tellimuse kättesaamine venis, pidin meeldetuletuse saatma ja kohale minnes oli pisut seiklemist, et õige koht üles leida, aga lõpp hea - kõik hea ja kleebiste tulemus oli 5+ ;)
Posted on Google
Aivo Mägi profile picture
Aivo Mägi
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex checks that the original source of this review is Google.
I am posting this three months after using the service so I know what I am praising. The work is high quality and precise. The decal stays on even after different car washes with brushes, chemicals and heat. Translated from Estonian.
Original reviewTeen postituse 3 kuud peale teenuse ostmist, et teaks, mida kiidan. Töö on kvaliteetne, täpne. Kleebis püsib peal isegi peale igasuguseid pesulaid - harjad, keemia, kuumutamine.
Posted on Google
Alx Rog profile picture
Alx Rog
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex checks that the original source of this review is Google.
I found them through a search and worked with Daniel. They wrapped several cars and several trucks. Everything was straightforward, on time and without any “buts”. Daniel was responsible and always kept me updated on the process. Keep it up, guys ) Translated from Russian.
Original reviewЯ нашёл их в поиске, работал с Даниэль. Обклеили несколько легковых и несколько грузовых автомобилей, всё чётко, в срок и без каких-либо НУ. Даниэль ответственный и всегда держал меня в курсе процесса. Ребята, так держать )
Posted on Google
Andrei Zibarov profile picture
Andrei Zibarov
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex checks that the original source of this review is Google.
Quick work and good quality. What more could you ask for? Translated from Russian.
Original reviewБыстро и качественно. Что ещё надо?