Waterslide decals or waterproof stickers? The words matter

Colourful portrait artwork shown beside a set of colour swatches.

“Water sticker” can mean several quite different products. A model maker may mean waterslide decals, a window fitter may be talking about applying film with water and a drinks producer usually wants a label that will survive condensation. Tell the printer about the object first. That clears up most of the confusion.

A waterslide decal carries a thin image layer on a backing. Moisture releases the image so it can slide onto the model or decorative object. The film is delicate and the preparation depends on the product and surface. Follow the instructions for your specific product. For an example, see Bedlam Creations’ waterslide application guide.

A pressure sensitive sticker already has adhesive under its face material. You remove the backing and apply it to a suitable surface. Some films permit wet application and others must be fitted dry. Using water during fitting doesn’t turn the vinyl into a waterslide transfer or establish how it will stand up to washing later.

For a label used around water, be specific. Occasional wiping with a damp cloth, repeated washing and prolonged immersion are different demands. The face material, ink, adhesive and any protective layer all affect the result. Test a sample on the real object and look at the edge as well as the printed face after normal use.

Our sticker printing service covers self adhesive labels and graphics for packaging, doors and windows. If your design specifically calls for a thin waterslide transfer, tell us that before ordering so we can check availability for the job.