How to apply a vinyl decal to a smooth indoor surface

If a decal must sit level with a shelf, measure from the shelf as well as the floor. In an older room they may tell two different stories. Hold the design up with its backing still on and stand where you’ll normally see it. Once the position looks right, make two small reference marks with removable tape.
Get the surface ready
To apply a vinyl decal successfully, start with a clean, dry, sound finish. Glass, smooth cabinet fronts and painted walls need different checks. Remove dust, fingerprints or cleaner residue with a method suited to the surface. Fresh paint needs to cure. On an uncertain finish, try an offcut in a hidden spot and check what happens when you remove it.
Set the decal, a soft applicator, tape and a clean cloth within reach. If the design is supplied on application tape, keep the lettering or small shapes together on that tape as directed. With a single printed piece, keep the backing under most of the sheet while you line up the starting edge.
Work in short sections
Tack down that edge at your reference marks. Expose a little more of the adhesive, smoothing from the secured part towards the free edge. Take your time around fine corners. If a crease starts, stop before the whole sheet is pressed down and check whether the product allows repositioning. Pulling hard can stretch the shape even if the adhesive comes back up.
Remove any application tape at the angle recommended for the material. Look along the edges in side light and leave the graphic alone for the advised period before wiping it. A small flat indoor decal can be a manageable first job. For a design that spans several panes, our large decal fitting guide covers where the extra difficulty comes from.
