Ordering a roll-up banner stand for an event in Tallinn

The first thing to measure for a roll-up banner stand is the space at the event. A stand that looks generous in a meeting room can block half the entrance to a small exhibition booth. Check the width, the ceiling height and where the audience will approach from. If there’s a table in front, mark how much of the print it will hide.
Choose the stand before finishing the file
An 85 × 200 cm single-sided stand is a practical starting point against a wall. A freestanding display on a route people walk both ways may benefit from two printed sides. A wider graphic makes sense for a backdrop if you have space for the base and room to see it from a little further away. Most indoor retractable stands belong indoors. Ask for an outdoor-rated display if the event is in the open air.
Use the template for the actual mechanism. The portion held inside the base and the top fixing affect where the artwork can end. Keep the logo, main message and essential contact details in the visible area. For an event series, put the permanent message on the main stand and use a smaller separate piece for dates that will change.
| Part | Before you leave |
|---|---|
| Base and pole | Check the parts fit and the base stands level. |
| Graphic | Look for damage and roll it back under control. |
| Bag and artwork | Pack the pole and save the print file for the next event. |
Confirm what you’re picking up
Check whether the quote covers the graphic, base, pole, bag and any artwork help. For reference, our roll-up banner page lists the 85 cm single-sided kit at €59 and the double-sided kit at €119, excluding VAT. It also lists wider versions. Give the event date and the time you need the stand in your hands. A morning setup may mean collecting the previous day.
Open the stand once before you travel. Assemble the pole, raise the graphic evenly and look at it from both ends of the aisle. While packing, guide the panel back into the cassette so the edge stays straight. If you want to reuse the base with a new graphic later, ask whether the model supports replacement prints.
